WEG Soft-Starter SSW061400T2257ESH2Z

CALL NOW ! 800-985-6929

Email: info@automatedpt.com

WEG Soft-Starter SSW061400T2257ESH2Z


Input Power Supply 3-Phase 230V

Motor HP 550

Soft Starter Amps 1400

Frame Size 8

Enclosure IP00

Duty Cycle 300% full load amps for 30 seconds, 10 starts per hour.

Ramps Adjustable acceleration and deceleration ramps (1 – 299 seconds)

Inputs Six isolated 24Vdc programmable digital inputs. Motor PTC thermistor input.

Outputs Three programmable relay outputs (2 Amp – 250V). One 0 – 10Vdc programmable analog output. One 4 – 20mA programmable analog output.

Certifications CE, UL for US and Canada

Pedestal Voltage Adjustable pedestal voltage (25 – 90% of line voltage)

Diagnostic Features Motor overload, over current and phase loss, motor immediate over and under current, SCR over temperature and fault, line phase loss and phase sequence, line over and under voltage

Display Readings Motor current, voltage, kW andpower factor, line voltage and frequency, four lastfault trips, run and power-up timers

Ambient Temperature 55 ºC

Altitude 3300 ft
1000 m

Humidity 90% non-condensing humidity

Soft Starter Features Built-in run rated (AC1) by-pass contactor. Voltage ramp or current limit start modes. Detachable keypad with dual display (LCD and LED) and copy function. 90 – 250Vac auxiliary control voltage. Single 32 bit RISC processor based control board. RS-232 serial interface.

Motor Volts 230 V

Dimensions 49 x 27 x 18

Approx. Shipping Weight 480 lbs

Click on the links below to see Drawings and Specs:

Purchase your WEG Soft-Starter SSW-06 Drive NOW!


WEG Soft-Starter SSW061400T2257ESH2Z

Purchase your WEG Combination Soft Starters GPH2 NOW! Call for pricing and availability.