Boston Gear 700 Series Single Reduction Worm Gear

Our standard 700 Series – the heart of Boston Gear’s speed reducer product line – has been serving industry reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today’s worm gear speed reducer market. But why settle for a knock-off when you can have the original – from Boston Gear.

CATALOG & MANUALS

 
CatalogBoston Gear Catalog 700 Series Worm Gear Drives
Users ManualBoston Gear 700 Series Single Worm Gear Installation and Operation
DimensionsBoston Gear 700 Series Single Deduction Dimensions

Single Reduction Numbering System / How to Order

Single Reduction Numbering System / How to Order


Style – Designates reducer or flanged reducer, projecting or hollow output shaft.

CDesignates cast iron flange and base. (Standard on motor flanges 3 HP (180TC) and up and all bases except horizontal (710-726).
BlankSingle reduction reducer with projecting input and output shafts. (No code letter required). 
HSingle reduction reducer with projecting input and BostMount hollow output shaft. (No flange) ( 713-738)
SSingle reduction reducer with hollow output shaft. (Sizes 718, 721, 726 and 732).
FSingle reduction flanged reducer (Quill types) with projecting output shaft.
HFSingle reduction flanged reducer (Quill types) with BostMount hollow output shaft. (Sizes 713-738)
QCSingle reduction flanged reducer (Coupling types) with projecting output shaft.
HQCSingle reduction flanged reducer (Coupling types) with BostMount hollow output shaft. (Sizes 713-738)
RFSingle reduction flanged reducer (Coupling types) with Projecting output shaft. 752 – 760 Size Only
BKDesignates Cast Iron, White BostKleen paint
SBKDesignates Cast Iron, Stainless BostKleen paint
SSFStainless Steel Single reduction flanged reducer (Quill types) with projecting output shaft.
SSHFStainless steel single reduction flanged reducer with BostMount hollow output shaft.

 

SIZE – Center distance, rounded off.

710 – 1.00
713 – 1.33
715 – 1.54
718 – 1.75
721 – 2.06
724 – 2.38
726 – 2.62
730 – 3.00
732 – 3.25
738 – 3.75
752 – 5.16
760 – 6.00

 

BASE – Base positions relative to output shaft. Shipped separately as Base Kits.

BlankNo base kit supplied
A,BHorizontal bases
C,D,E & FVertical Bases0
R/LBostMount Output Bracket
XInput Vertical Up
YInput Vertical Down
BRBHorizontal base with riser block
V,WFlanged bases, available on “S” hollow shaft
models only. Factory assembled.
M/NFlanged bases, available on “CFA” hollow shaft models
only.

 

Ratio  – See Selection Tables for available ratios (See Below)

 

Lubrication Optional Prelubrication.

Blank – No Lubrication supplied.
K – Klubersynth UH1 6-460
S – Mobil SHC634 Synthetic Lubricant
X – Mobil 600W
*When specifying optional prelubrication, include
mounting position after shaft assembly.

Lubrication Optional Prelubrication.
Optional fan available on sizes 732-760 single reduction only

 

Single Reduction Numbering System / How to Order


Style – Designates reducer or flanged reducer, projecting or hollow output shaft.

CDesignates cast iron flange and base. (Standard on motor flanges 3 HP (180TC) and up and all bases except horizontal (710-726).
BlankSingle reduction reducer with projecting input and output shafts. (No code letter required). 
HSingle reduction reducer with projecting input and BostMount hollow output shaft. (No flange) ( 713-738)
SSingle reduction reducer with hollow output shaft. (Sizes 718, 721, 726 and 732).
FSingle reduction flanged reducer (Quill types) with projecting output shaft.
HFSingle reduction flanged reducer (Quill types) with BostMount hollow output shaft. (Sizes 713-738)
QCSingle reduction flanged reducer (Coupling types) with projecting output shaft.
HQCSingle reduction flanged reducer (Coupling types) with BostMount hollow output shaft. (Sizes 713-738)
RFSingle reduction flanged reducer (Coupling types) with Projecting output shaft. 752 – 760 Size Only
BKDesignates Cast Iron, White BostKleen paint
SBKDesignates Cast Iron, Stainless BostKleen paint
SSFStainless Steel Single reduction flanged reducer (Quill types) with projecting output shaft.
SSHFStainless steel single reduction flanged reducer with BostMount hollow output shaft.

SIZE – Center distance, rounded off.

710 – 1.00
713 – 1.33
715 – 1.54
718 – 1.75
721 – 2.06
724 – 2.38
726 – 2.62
730 – 3.00
732 – 3.25
738 – 3.75
752 – 5.16
760 – 6.00

BASE – Base positions relative to output shaft. Shipped separately as Base Kits.

BlankNo base kit supplied
A,BHorizontal bases
C,D,E & FVertical Bases0
R/LBostMount Output Bracket
XInput Vertical Up
YInput Vertical Down
BRBHorizontal base with riser block
V,WFlanged bases, available on “S” hollow shaft
models only. Factory assembled.
M/NFlanged bases, available on “CFA” hollow shaft models
only.

Ratio  – See Selection Tables for available ratios (See Below)

Lubrication Optional Prelubrication.

Blank – No Lubrication supplied.
K – Klubersynth UH1 6-460
S – Mobil SHC634 Synthetic Lubricant
X – Mobil 600W
*When specifying optional prelubrication, include
mounting position after shaft assembly.

Lubrication Optional Prelubrication.
Optional fan available on sizes 732-760 single reduction only

Blank – No Fan Kit. E – End Cap (standard) F – Fan Kit

VENT – Pressure Relief.

Blank – Standard Vent
P – 5 PSI Vent
Z – PosiVent® Pressure Compensationg Bladder

Oil Seals

Blank – Standard Seal
T – Double Input Seals. Recommended for mounting positions 2, 3, 4, 6
C – High pressure/wash down configuration for stainless gearboxes. Contains double input seals and axial face seals on the output.

Nema – Designates flange size and input bore diameter. Flanged reducers only. Leave blank for projecting input reducers.

Shaft Assembly Assembly shaft arrangements. 
G – Standard assembly (left)
H – Double output shaft projection
J – Opposite to standard (right)
GS – Stainless standard assembly (left)
HS – Stainless double output shaft projection
JS – Stainless opposite to standard (right)

Mounting Position

Designates the position of oil and vent plugs with respect to mounting.
Blank– For units not supplied prelubricated.
1-6 – See pages 18 and 19.

Output Bore Code
Specified in 1/16” increments. See page 128 for complete offering. Example 1 1/4” = P20 For H Series only.

Single Reduction Speed Reducer Selection Procedure


To properly select a speed reducer, the following application information must be known:

Input RPM (Ratio)
Output Torque
Input Horsepower

Service Factor
Non-Motorized Speed Reducer
1. Determine service factor from table below.
2. Determine design horsepower.
Design Horsepower = Application Load x Service Factor
3. Select a speed reducer size that satisfies output RPM, service class and/or output torque requirements.
4. Check overhung load capacity.

Motorized Speed Reducer
1. Determine service class from table below.
2. Select a reducer size that satisfies output RPM, service class and/or output torque requirements.
3. Check overhung load capacity.